Petites annonces

Textile Machineries for Sale

The following machines are available for immediate sale:

1) 2 x Dornier Rapier Weaving Machines Model PTS 8/S – 2006. Working width 230cm, 8 colour, Staubli Electronic dobby 16 shafts, Neuhauser batching motions.

2) 2 x Dornier Rapier Weaving Machines Model PTS 8/S – 2006. Working width 270cm, 8 colour, Staubli Electronic dobby 16 shafts, Neuhauser batching motions.

Each machine...Lire

Textile Machineries for Sale

The following machines are available for immediate sale:

1) 2 x Dornier Rapier Weaving Machines Model PTS 8/S – 2006. Working width 230cm, 8 colour, Staubli Electronic dobby 16 shafts, Neuhauser batching motions.

2) 2 x Dornier Rapier Weaving Machines Model PTS 8/S – 2006. Working width 270cm, 8 colour, Staubli Electronic dobby 16 shafts, Neuhauser batching motions.

Each machine equipped with:

8 x Dornier Chrono X2 weft accumulators
12 x Heald frames
4000 x Heald and drop wires
1,5 x Warp beams with 1000mm flange diameter
1 x Neuhauser batching motion.

The machines have not been used very much, condition is like new.

4 x Sulzer Projectile Weaving Machines Model P7200 B 330 N 4 EP K - 1998
Working width 330cm, 4 colour, 10 shaft cam motion.

2 x Sulzer projectile Weaving Machines Model P7200 B 360 N 4 EP K - 1998
Working width 360cm, 4 colour, 10 shaft cam motion.

Each machine equipped with:

6 x Heald frames
1 x Centre tuck-in unit
4 x Weft accumulators
3 x Half warp beams with flange diameter of 1000mm.
80% projectiles and guide teeth
4000 x Heald and drop wires.
1 x Grob batching motion.
Included is a good selection of new original Sulzer spare parts.

7 x Sulzer Projectile Weaving Machines Model PU 130” E10 120 D2 - 1980

7 x Sulzer Projectile Weaving Machines Model TW11 130” E10 105 D2 - 1974

6 x Sulzer Projectile Weaving Machines Model TW11 153” E10 105 D1 - 1974

2 x Sulzer Projectile Weaving Machines Model TW 11 130” E10 105 D1 - 1973

2 x Sulzer Projectile Weaving Machines Model TW11 153” E10 105 D2 - 1974

Each machine equipped with:

6 x Cams 1/1
6 x Heald frames
10 x Projectiles
1 x Batching motion

No beams, centre tuck-in units, weft accumulators, front covers, hand wheels, spare parts. All machine are running.

2 x Scholl Rapidstar HT Jet Dyeing Machines – 1997. Capacity 500kg each with Areal ATC 364 controllers.

2 x Scholl Rapidstar HT Jet dyeing machines – 1982. Capacity 300kg each, Arel ATC 364 controllers.

1 x Scholl Subtilo HT Jet dyeing machine – 1982. Capacity 300kg, Arel ATC 364 controller.

1 x Zimmer RMR Coating Machine – 1982. Working wiodth220cm.

1 x Evac Vacuum slot 320cm working width.

1 x Bruckner stenter – 1993. Working width 220cm, 2 compartments, pin only chain, steam heated. Plaiter and “A” frame batching, 380/3/50hz.

1 x Fleissner Open Width Washing Range – 1998. Working width 300cm, one saturation section with 6 suction drum washing boxes. Exit plaiting. Machine is an excellent condition, still installed and running.

Complete Acrylic Blanket Plant:


Spinning:

Complete acrylic blanket plant consisting of;
1 x Fibre pre-opening line Tamafa/Akdermak – 2006
1 x Metal and Fire detectors
1 x Truetzschler bale opener Model TO-TI - 2006
1 x Luwa Separator – 2006
4 x Truetzschler Cards Model TC 03 with Direct feed – 2006
2 x Truetzschler Regulating Draw Frames model TD 03 – 2006
2 x Rieter/Ingolstadt Open End Spinning Frames (Himatex reconditioned) – 2006
Capacity approximately: 6’500kg/24 hours

Weaving Preparation:

1 x Ozturk Eleckturk sectional warper with creel - 2005

Weaving:

2 x Dornier Rapier Weaving Machines 240cm Model PVT 8/J – 2004
6 x Dornier Rapier Weaving Machines 270cm Model PVT 8/J – 2004
2 x Dornier Rapier weaving Machines 230cm Model PTS 8/J – 2005
6 x Dornier Rapier weaving Machines 260cm Model PTV 8/J – 2005
2 x Dornier Rapier Weaving Machines 230cm Model PTS 8/S – 2006
2 x Dornier Rapier Weaving Machines 270cm Model PTS 8/J – 2006

Each machine equipped with:

1 x Staubli Electronic jacquard Model CX 870 with 2688 hooks, JC5 controllers - 2004 to 2006
8 x Weft accumulators
1,5 warp beams 1000mm flange diameter
3000 x drop wires.
1 x Batch motion

Finishing

1 x Lamperti Raising Machine Model GBM 91 36 rollers, width 260cm – 1991

2 x Lamperti Raising Machines Model GBM/A 36 rollers each, width 260cm – 2001

2 x Lamperti Raising Machines Model GBM/A 36 rollers each, width 260cm each – 2003/6

2 x Comet Raising Machines Model PEGASUS 36 rollers each, width 260cm - 2006

1 x Comet Raising Machine Model PEGASUS 36 rollers, width 260cm

1 x Comet Raising Machine Model H4DRA 36 rollers, width 260cm – 2006

1 x Lamperti Raising Machine Model GB/L84, 34 rollers, with 260cm - 1988

1 x Hergeth Shearing, cropping and Tiger line – 1993 - 2003

1 x SESLI automatic hemming machine - 2007

1 x Kuris Slitting Machine – 2006

Various sewing machines.

Total Plant Capacity: approximately 8’000 blankets/24 hour day

Still in production.

Please don’t hesitate to contact us for any further information you may require.

[Réduire]

Online Auction for High Quality Textile Machinery

High Quality Textile Machinery Spinning, Weaving, Twisting & Finishing.
Dornier & Vamatex Airjet Weaving Machines (Qty 36) & Hamel Twist & Winding Machines (Qty 13).

All Machines in excellent condition.
Sale Closing: Tuesday, 20 May 2008 at 14:00 EET (local time).
Location of Assets: Durban, South Africa.
Inspection: By appointment only

SPINNING

. Marzol...Lire

Online Auction for High Quality Textile Machinery

High Quality Textile Machinery Spinning, Weaving, Twisting & Finishing.
Dornier & Vamatex Airjet Weaving Machines (Qty 36) & Hamel Twist & Winding Machines (Qty 13).

All Machines in excellent condition.
Sale Closing: Tuesday, 20 May 2008 at 14:00 EET (local time).
Location of Assets: Durban, South Africa.
Inspection: By appointment only

SPINNING

. Marzoli ‘FT1 Banco’ Speed Frame (2002)
. Marzoli ‘RST 1 Filataio’ Ring Frame, 1296 Spindles, 70mm Gauge, Auto Doffing, Tube Length 200mm, Texparts Drafting, with Sohler Overhead Blower (Qty 5, 2001, 2002, 2004)
· Schlaforst ‘338 Type D’ Auto Coners, 60 Spindles (Qty 2, 2003)

TWISTING

. Saurer Hamel ‘ET240C’ Balloonless Covering Twisters, 220 Spindles, Spindle Gauge 210mm, Size 16 Flanged Spindles, Take Up on Cylindrical Tubes 170mm Inner Dia 53mm, Overfeed Roller for Producing Dye Packages (2002)
. Saurer Hamel ‘ET240’ Balloonless Covering Twisters 220 Spindles, Spindle Gauge 210mm, Size 16 Flanged Spindles, Take Up on Cylindrical Tubes 170mm Inner Dia 53mm, Overfeed Roller for Producing Dye Packages (Qty 3, 2002)
. Saurer Hamel ‘H2020E’ Balloonless Covering Twisters, 216 Spindles, Spindle Gauge 210mm, Size 16 Flanged Spindles, Take Up on Cylindrical Tubes 170mm Inner Dia 53mm, Overfeed Roller for Producing Dye Packages (Qty 3, 2001)
. Saurer Hamel ‘2016E’ Balloonless Covering Twisters, 216 Spindles, Spindle Gauge 210mm, Size 16 Flanged Spindles, Take Up on Cylindrical Tubes 170mm Inner Dia 53mm, Overfeed Roller for Producing Dye Packages (Qty 3, 1997 & 1999)
. Carl Hamel ‘2016’ Elastotwisters, Uptwisters Converted to Elastotwisters, 214 Spindles, Spindle Size 16 Flanged, Spindle Gauge 210mm, with Overfeed Device for Producing Dye Packages (Qty 4, 1988)
. Carl Hamel ‘2016’ Uptwister, 214 Spindles, Spindle Size 16 Flanged, Spindle Gauge 210mm, with Overfeed Device for Producing Dye Packages (Qty 6, 1988 & 1989)
. Saurer Hamel ‘HDW R’ HD Assembly Winder, 30 Spindles (Qty 2, 2002)
. Saurer Hamel ‘H1016’ HD Assembly Winder, 80 Spindles (1999)
. Carl Hamel ‘Classic’ Assembly Winder, 80 Spindles (1988)
. Benninger ‘Supertronic’ Sectional Warping Machine, 2 Creels, 480 ends each (1995)

AIRJET WEAVING

. Dornier ‘LWV4/S’ Airjet Weaving Machines, 210cm, 4 colours, Batching Motion, 1.5 Warp Beams (1000mm), Disco Leno Selvedge, Staubli Dobby (Qty 2,1999)
. Dornier ‘LWV4/S’ Airjet Weaving Machines , 230cm, 2 colours, On Looms Take Up, 1.5 Warp Beams (1000mm), Staubli Dobby 2871/2 Electronic (Qty 6,2001)
. Dornier ‘LWV4/S’ Airjet Weaving Machines, 210cm, 4 Colours, On Loom Take Up, 1.5 Warp Beams (1000mm), Staubli Dobby 2580 RS Electronic (Qty 4,1994)
. Dornier ‘LWV6/S’ Airjet Weaving Machines, 210cm, 6 Colours, On Loom Take Up, 1.5 Warp Beams (1000mm), Staubli Dobby 2580 RS Electronic (Qty 8,1995)
. Dornier ’LWV4/S’ Airjet Weaving Machines , 210cm, 4 Colours, Batching Device, 1.5 Warp Beams (800mm), Staubli Dobby Electronic 2871/2 (Qty 2,2000)

RAPIER WEAVING

. Dornier ‘HTN4/SD’ Rapier Weaving Machines, 190cm, 4 Colours, On Loom Take Up, 1.5 Warp Beams (800mm), Staubli Dobby 2237 Mechanical (Qty 2,1991)
. Dornier ‘HTV6/SD’ Rapier Weaving Machines, 210cm, 6 Colours, On Loom Take Up, 1.5 Warp Beams (800mm), Staubli Dobby 2037 Mechanical (Qty 3,1993)
. Dornier ‘HTN/SD4’ Rapier Weaving Machines, 210cm, 4 Colours, On Loom Take Up, 1.5 Warp Beams (800mm), Staubli Dobby 2237 RS Mechanical (Qty 4, 1992)
. Dornier ‘HTN/SD4’ Rapier Weaving Machines, 210cm, 4 Colours, On Loom Take Up, 1.5 Warp Beams (800mm), Kaiser Dobby 6021 Mechanical (Qty 2,1987)
. Dornier ‘GVWN6/SD’ Rapier Weaving Machines, 210cm, 4 Colours, On Loom Take Up, 1.5 Warp Beams (800mm), Kaiser Dobby 6021 Mechanical (Qty 2,1981)
. Vamatex ‘Leonardo’ Rapier Weaving Machines, 210cm, 4 Colours, 1.5 Warp Beams (800mm) Staubli Dobby 2670 (Qty 8, 2000, 2001)
. Vamatex ‘P1001’ Rapier Weaving Machines, 190cm, 4 Colours, 1.5 Warp Beams (800mm), Fimtessile Cam Box (Qty 12, 1991)

FINISHING

. Unitech ‘Yellow/SR/2S/180’ Equalising Stenter, Gas Heated, 2 Chambers, 180cm, Steaming Unit, Corino Weft Straightner (2003)
· Stentex ‘Stentotherm 3300E’ Tentering Frame, Oil Heated (With Boiler), 5 Chambers, 220cm, Bianco Weft Straightner, Evac Slots, Stentex Padder (1996)
· Ramish Kleinewefers Calander, 180cm, Eletrical Heated, 3 Rollers, with Water Chiller (1990)
· Mario Crosta ‘10/36’ Raising and Shearing Machine, 180cm, 36 Rollers, Single Cylinder Shearing Unit (1994)
. Comet ‘Zephyr M21’ Rolling and Steaming Machine, 200cm (1997)

[Réduire]

Recherche de consultants ou organismes spécialisés dans le secteur de la pêche et de l’aquaculture

Recherche de consultants ou organismes techniques (universités, centres spécialisés) européens et ACP spécialisés dans le secteur de la pêche et de l’aquaculture dans les pays ACP.
===

Cher membre du réseau,

Dans le cadre de la préparation de nos programmes et en prévision de travaux futurs (2008-2009), le CDE cherche à constituer une base de données de consultants et d’orga...Lire

Recherche de consultants ou organismes spécialisés dans le secteur de la pêche et de l’aquaculture

Recherche de consultants ou organismes techniques (universités, centres spécialisés) européens et ACP spécialisés dans le secteur de la pêche et de l’aquaculture dans les pays ACP.
===

Cher membre du réseau,

Dans le cadre de la préparation de nos programmes et en prévision de travaux futurs (2008-2009), le CDE cherche à constituer une base de données de consultants et d’organismes techniques spécialisés dans le secteur pêche/aquaculture dans les pays ACP (Afrique, Caraïbes, Pacifique), en particulier, dans les domaines suivants :

– Économie et Finances (analyse, audit, plan d’affaires) dans le secteur pêche;
– Architecture navale (pour petites embarcations artisanales) ;
– Ingénierie motrice (moteurs bateau) ;
– Ingénierie du froid ;
– Optimisation énergétique ;
– Alimentation pour poisson.

Les manifestations d’intérêts peuvent être envoyées avec CV ou plaquette de présentation au Centre pour le Développement de l’Entreprises (CDE) à Erik Rotsaert (Email : ero@cde.int), responsable sectoriel (CDE) à Bruxelles. Toute information complémentaire peut également être obtenue en cas d’absence auprès de Carlos Sanchez Regueiro (Email : csr@cde.int ) (voir coordonnées complètes en fin de mail).

Les consultants ou organismes techniques spécialisés retenus pourraient être contactés par le CDE ou par un de ses partenaires pour des missions de courte ou moyenne durée (maximum 1 an) dans un ou plusieurs pays ACP.

Nous vous saurions gré de bien vouloir faire circuler cette information dans les milieux concernés.

Vous remerciant de votre intérêt et collaboration éventuelle, nous vous prions d'agréer nos salutations distinguées.

Jean-Marie Delchambre

[Réduire]